.....
81
Set telephone extension option
This command enables/disables “line-in-use” and “extension pickup” options.
-STE=n Value Extension Pickup Line-In-Use
0 (default)
Disabled
Disabled
1
Disabled
Enabled
2
Enabled
Disabled
3
Enabled
Enabled
Set Telephone Extension Options
If the line is in use and the modem receives an ATDT command to dial out, the modem will not go
off hook and will display the “LINE-IN-USE” result code. If the modem is off hook and the extension
is picked up, the modem will drop the connection and display the “OFF-HOOK INTRUSION” result
code.
AT S registers
The S registers use the following format: ATSr=n<CR> where the “r” is the S register number and
“n” is the parameter to set it to. To read the current contents of an S register, issue an ATSr?<CR>
command where “r” is the register in question. The modem will then display the value of the S
register.
Register Range Units
Default Description
S0
0-255 Rings
0
Ring to answer on. ATS0=1<CR> means answer call on first ring
detected.
S1
0-255 Rings
0
Number of rings counted.
S2
0-127 ASCII
43
Escape code character.
S3
0-127 ASCII
13
Command terminator<CR>.
S4
0-127 ASCII
10
Line feed character.
S5
0-127 ASCII
8
Backspace character.
S6
2-255 Seconds 2
Wait time for dial-tone detection.
S7
1-255 Seconds 50
Wait time for carrier.
S8
0-255 Seconds 2
Pause time for coma in dial string.
S10
1-255 .1sec
14
Loss of carrier to hang up delay.
S11
50-255 .01sec
85
DTMF tone duration.
S12
0-127 1/50 sec 50
Escape code guard time.
S24
0-255 1sec
0
Sleep mode inactivity timer.
S29
0-255 10mS
70
Hook flash dial modifier time.
S30
0-255 10Sec
0
Inactivity disconnect timer.
S95
0
Result code control.
AT S Registers
Summary of Contents for Avocent ACS 6000
Page 1: ...Avocent ACS 6000 Advanced Console Server Installer User Guide ...
Page 6: ......
Page 12: ...Introduction 6 ...
Page 22: ...Installation 16 ...