3
Inventory List:
(Equipment may vary)
• AutoSense Standalone
• 6ft. Low Voltage Extension Cord
• Rubber Reader Antenna
• 2 Cellular Paddle Antennas
• 100-240VAC Power Supply
Installation Hardware:
• Cable Ties
• Cable Tie Mounts
• Mounting Screws
• Cable Clamps
• Test Logger
Equipment
AutoSense Standalone Installation
1. Attach the 2 cellular paddle antennas and the single rubber reader antenna.
2. Mount on wall at least 6 ft. up and in front of dock doors using one of these methods:
a.
Mounting screws
b. Cable ties and cable tie mounts
3. Plug power supply into a non-switched power outlet
4. Take picture of AutoSense Standalone and send it to [email protected]
Kit Equipment