Emerson ATCA-8310 Manual Download Page 109

Page: 109 / 460

BIOS

ATCA-8310 Installation and Use (6806800M72D)

109

The Aptio navigation can be accomplished using a combination of keys. These keys include
<Fn> keys, <ENTER>, <ESC>, <ARROW> keys and so on.

The table below briefly describes the primary menus, most of which have sub-menus. The
following sections describe the menus in detail.

Table 5-1 Aptio Navigation

Key

Description

ENTER

The Enter key allows the user to select an option, to edit its value or
access a sub-menu

? (Left) ? (Right)

The Left and Right arrow keys allow to select a menu

?(Up) ? (Down)

The Up and Down arrow keys allow to select a sub-menu or an item

+ (Plus) - (Minus)

The Plus and Minus keys allow to change the field value of a particular
setup item

TAB

The Tab key allows to select fields

ESC

The Esc key allows to exit the Aptio Setup without saving of any
changes. When you are in a sub-menu, Esc key allows to get to the
upper-level menu.

Fn (Function n)

When any Function keys become available, they are displayed at the
right side of the screen along with their meaning.

General Help

Load previous values

Load optimized values

Save & Exit

Table 5-2 Menu Description

Sub-Menus/Options

Main

BIOS Information, Memory Information, Platform Information, System
Language, System Date and Time, Access Level

Summary of Contents for ATCA-8310













































































































































































































































































































































































































































































Search results

Summary of Contents for ATCA-8310

Reviews:

Related manuals for ATCA-8310

Brands by name

Popular brands

Emerson ATCA-8310, Manual

Search results

Summary of Contents for ATCA-8310

Reviews:

Related manuals for ATCA-8310

Brands by name

Popular brands