Manual Setup
Manual Setup lets you configure device settings manually.
Click the
Wireless tab
to display wireless network information for the transmitter.
Figure 2-2: Wireless tab
Click
Join Device to Network
to enter network identifiers and join keys that will enable the
transmitter to join a wireless network.
Click
Configure Update Rate
to set how often the device acquires and reports new
measurements (update rate) and to specify the number of times the transmitter skips data
acquisitions between updates to the gateway (PowerSave Skip Multiplier).
Click
Apply Default Burst Configuration
to reset the burst configuration to default values.
User Guide
Configuration
MHM-97927-PBF
July 2020
MHM-97927-PBF, DRAFT
29
Summary of Contents for AMS
