Introduction and Safety
Advantage 2.1 Actuator Installation and Operation Manual
3
• Ensure that the contents of the operating instructions have been fully understood by the
personnel.
Instruction and training can be carried out by ASCO as the reseller of the valve by order of the
manufacturer.
Non-compliance risks
Failure to comply with all safety precautions can result in the following conditions:
• Death or serious injury due to electrical, mechanical, and chemical influences
• Environmental damage due to the leakage of dangerous materials
• Product damage
• Property damage
• Loss of all claims for damages
Operational safety precautions
Be aware of these safety precautions when operating this product:
• Do not leave hot or cold components of the product unsecured against contact if they are a
source of danger.
• Do not remove the contact guard for moving parts when the product is in operation. Never
operate the product without the contact guard installed.
• Do not hang items from the product. Any accessories must be firmly or permanently
attached.
• Do not use the product as a step or hand hold.
• Do not paint over the identification tag, warnings, notices, or other identification marks
associated with the product.
Maintenance safety precautions
Be aware of these safety precautions when performing maintenance on this product:
• You must decontaminate the product if it has been exposed to harmful substances such as
caustic chemicals.
Use of unauthorized parts
Reconstruction or modification of the product is only permissible after consultation with ITT.
Genuine spare parts and accessories authorized by ITT serve to maintain safety. Use of non-
genuine ITT parts can annul liability of the manufacturer for the consequences. ITT parts are
not to be used in conjunction with products not supplied by ITT as this improper use can annul
all liability for the consequences.
Unacceptable modes of operation
The operational reliability of this product is only guaranteed when it is used as designated. The
operating limits given on the identification tag and in the data sheet may not be exceeded under
any circumstances. If the identification tag is missing or worn, contact ASCO for specific
instructions.
Designed and Manufactured by ITT
