Emerson ACC/ARTM-7221/SCSI Installation Manual Download Page 11 | Manualshive

Page: 11 / 62

Emerson ACC/ARTM-7221/SCSI Installation Manual Download Page 11

About this Manual

ACC/ARTM-7221/SCSI Installation Guide (6806800F01A)

11

Summary of Changes

Comments and Suggestions

We welcome and appreciate your comments on our documentation. We want to know what you
think about our manuals and how we can make them better.

Mail comments to us by filling out the following online form:

http://www.emersonnetworkpowerembeddedcomputing.com/

> Contact Us > Online Form

Indicates a hazardous situation which, if not
avoided, could result in death or serious
injury

Indicates a hazardous situation which, if not
avoided, may result in minor or moderate
injury

Indicates a property damage message

No danger encountered. Pay attention to
important information

Notation

Description

Order
No.

Rev.

Date

Description

224618

AA

January 2005

First draft

224618

AB

March 2005

Changed Force Computers to Motorola throughout the document
(includes logo, addresses etc.); renamed ARTM-720/SCSI (Force
name) to ARTM-7120/SCSI (new Motorola name)

224618

AC

December 2005

Updated front panel description; editorial changes; included 3D
graphics; included IPMI information; updated connector
description;:renamed RTM to new official name: ACC/ARTM-
7221/SCSI; added power requirements and critical temperature limits;
renamed RTM to ACC/ARTM-7221/SCSI (new official product name)

224618

AD

April 2006

Update for final release

6806800
F01A

March 2008

Update document to Emerson style (logo, copyright, etc.)

«
...
9
10
11
12
13
...
»

Summary of Contents for ACC/ARTM-7221/SCSI































































Reviews:

No comments