1.
Pressure:
Varies the inhalation and exhalation pressures together
(also see Inhale Pressure).
2.
Manual Control Lever:
Use to manually cycle the unit to inhale
or exhale.
3.
Power:
The power switch turns on or off the unit. The “
I
” symbol
on the switch designates the on position. When activated a green
light within the switch will illuminate. The “
O
” symbol designates
the off position.
4.
Handle:
Recessed carrying handle.
5.
Patient Port:
Connection for patient circuit.
6.
:
Symbol for Type B Equipment with F-Type applied part.
7.
Inhale Flow:
There are two inhalation flow settings: Full ( ) and Reduced ( ).
NOTE:
When using reduced inspiratory flow there will be a small reduction in inspiratory pressure.
8.
Inhale Pressure:
Varies the inhalation pressure between 50% and 100% of the
exhale pressure.
9.
Pressure Gauge Zero Adjust:
Access to “zero” adjustment on the pressure gauge.
Use only if the gauge does not return to “0” when the unit is turned off (see Section 8).
10.
Pressure Gauge:
Indicates pressure in the patient circuit calibrated in cm H
2
O.
o
1
2
3
4
5
6
7
8
9
10
C M - 3 0 0 0 , C M - 3 2 0 0
F
R O N T
P
A N E L
C
O N T R O L S
8
92804 3/28/01 8:36 AM Page 10
