12
Setting The Clock
You may use the buttons on the remote or the touch panel screen for this
operation.
Using remote or touch panel screen.
1.
Press the STANDBY (POWER) button
O
to switch the unit on.
2.
Press the
AUX
button. (Note the time setting appears at the center of the display.)
3.
Press
MEMORY
so that the hour digits flash, then immediately press
B
or
F
to set the correct hour.
Note:
Check the
AM / PM
indicator (to the left of the hour) to ensure you make the
correct setting.
4.
Press
MEMORY
again so that the minute setting flashes, then immediately press
B
or
F
to set the correct minute.
5.
Press
MEMORY
once more to finish the clock setting.
The display stops flashing and the clock begins to run.
Note:
•
If ever you find the whole time display is
flashing
, this means that the clock
needs to be re-set (possibly due to the unit having been disconnected from the
AC outlet, or a power interruption.)
•
Clock setting can be done even if unit is at
Standby
mode.
ES2_ib041503.p65
15/4/2003, 9:36
12
