background image

10

2. To increase or decrease the amount of time that the radio will play before shutting

off, hold the Sleep On button and press either the Up or Down button to change
the display to the desired sleep time, up to a maximum of 90 minutes or at
minimum of 2 minutes.

Note: When you change the sleep timer from the 10 minute default setting to

a different setting, the new setting becomes the default setting. Whenever
you activate the sleep timer it will begin with your new default setting
and count down to zero from that point.

3. To cancel the sleep timer before it counts down to “00” and shut the radio ‘Off’

immediately, press the Snooze Bar.

IMPORTANT:

 Remember that the station and volume settings you choose for the

Sleep To Music operation are the same settings you will hear if you set the alarm
for wake to radio the following morning.

DIMMER CONTROL

The Dimmer control was set to the ‘High’ position at our factory. If you find the clock
display is too bright in a darkened room, set the Dimmer control to the ‘Low’
position.

CHANGING THE LITHIUM BATTERY

Like all batteries, eventually the built in lithium battery will need to be replaced. A
number of factors, such as, the length of time between the date the radio was
manufactured and the date you plugged it in for the first time determine the
amount of time before replacement. During this initial storage period, the lithium
battery is supplying power to the SmartSet

®

 computer memory. Once you plug

the radio in, your household outlet supplies the power, and the battery is not
being used. A fresh lithium battery can supply power to the SmartSet

®

 computer

for at least 3 years even if it is never connected to an AC power supply. If your
radio was connected to your AC supply within a few months after it was
manufactured, and you experience only the normal, nuisance type, short duration
power interruptions, your battery may last for up to 5 years or even longer.

When the battery power drops below a certain level, the Low Battery indicator will
come on. When you see this indicator, you should change the battery as soon as
it is convenient for you to do so. To change the battery proceed as follows:

Summary of Contents for CKS2020

















Reviews: