Emerson Quiet Kool 10000 BTU, Owner'S Manual, Page: 17 / 25

12
1. Shows the set temperature.
Operation modes are: Cool, Dry, Fan, and Auto.
Time is displayed using the timer setting.
Digital Display:
and Button: 2. Use these buttons on the
control panel and remote to increase or decrease
the Set Temperature or Timer.
Temperature range: 61
~88 or 16 ~31 .
3. Turn the air conditioner on and
off.
Power Button:
Press the mode button to cycle
through the various modes: Cool, Dry, Fan and
Auto. 4. Mode Button:
Use buttons on the control panel
and remote to set the TIMER.
Timer Off: The timed stop is programmed by
pressing the TIMER button. Set the time by
pressing the button or
Timer On:
, set the temperature with pressing
the button or .
with pressing the
button or .
Note: It can be set to automatically turn off or on in
0.5-24 hours. Each press of the
buttons will increase or decrease the timer. The
Timer can be set in 0.5 hours increment below 10
hours and 1 hour increment for 10 hours or above.
The SET light will turn on while setting.
stop
until your
desired stop time is displayed, then press TIMER
button again.
When the unit is off, press TIMER
button first
Press TIMER button
a second time, set the stop time
Press TIMER button a
third time, confirm your settings and stop time.
The display will show the time your machine will
automatically turn on.
To cancel the set function, press the TIMER button
again.
5. Timer Button:
Cool Mode: The cooling function allows the air
conditioner to cool the room and at the same time
reduces humidity. Press the MODE button to
activate the cooling function. To optimize this
function adjust the temperature by pressing the up
and down arrows and the speed by pressing the
Fan Speed button.
Dry Mode: This function reduces the humidity of
the air to make the room more comfortable. Press
MODE button to set the DRY mode. An automatic
function of alternating cooling cycles and air fan
is activated.
Fan Mode:
Auto Mode: In AUTO mode the unit automatically
chooses the fan speed and the mode of operation
(COOL, DRY, or FAN). In this mode the fan speed
and the temperature are set automatically
according to the room temperature (
).
This mode will only circulate the air.
Press MODE button to select FAN MODE.
Pressing the FAN SPEED button allows you to
change the fan speed setting from HI, MED, and
LO. If using the remote control, it will store the fan
speed setting of the previous use.
Room
temperature is determined by the temperature
sensor located in the indoor unit.
1
2
3
4 5 6 7 8 9
AUTO
SPEED AUTO
MODE
WIFI
WIFI Symbol*
Only available
for WIFI
models.
NOTE: * means only available for WIFI modes, For more
information, please see the WIFI manual.