- 5 -
WK-123865.1 EN
HOUSEHOLD USE ONLY
PARTS DESCRIPTION
1.
Lid
2.
Lid opening button
3.
Handle
4.
Water gauge
5.
Spout
6.
Anti-calc filter
7.
Power base
8.
On/Off button with indicator light
9.
Temperature button (70
℃
) with indicator light
10.
Temperature button (80
℃
) with indicator light
11.
Temperature button (90
℃
) with indicator light
12.
Temperature button (100
℃
) with indicator light
13.
Keep warm button with indicator light
BEFORE USING YOUR KETTLE
If you are using the kettle for the first time, it is recommended that you clean your kettle before use by
boiling a full kettle of water twice and then discarding the water.
OPERATION OF YOUR KETTLE
1.
Open the lid by pressing the lid opening button; pour out left over water from previous boiling cycle
and fill with the desired amount of fresh water to the water kettle. Always fill the kettle between the
minimum (0.5L) and maximum (1.7L) marks. Too little water will result in the kettle switching off
before the water has boiled.
NOTE:
Do not fill the water over the maximum level, as water may spill out of the spout when boiling.
Ensure that the lid is firmly in place before connecting the power cord to the outlet.
2.
Close the lid. Position the kettle on the power base in place. Make sure the kettle contact with the
power base completely.
3.
Connect the plug into a power outlet. The indicator lights of the buttons on the power base will flash
once and then turn off completely. Press the on/off button to turn on the appliance, the indicator