- 7 -
NOTE: During use, please pay attention to the dust capacity and d
o no
t exceed the “MAX” level indicated on
the dust cup. This appliance is for dry suction only.
8.
After use, press the on/off button to turn off the appliance.
Caution: The suction hole opening must be open and free of any obstructions at all times. Otherwise, the motor
will overheat and could become damaged.
Note: In the event of a maintenance issue with the product such as a jammed brush roller, all three blue indicator
lights inside floor brush will flash on around 10 seconds then off until the issue is resolved, in this case turn the
appliance off until the issue is rectified.
CLEANING AND MAINTENANCE
1.
Do not immerse the main unit, battery pack, charging adapter, and floor brush in water or any other liquids.
2.
Use only a soft dry cloth to clean the appliance.
3.
Do not use aggressive chemicals or abrasives.
4.
Do not use the device if the filter is broken or worn out.
5.
The unit does not contain parts serviceable by you, do not disassemble it and do not try to repair it yourself.
1. How to empty the dust cup:
1)
Press the dust cup release button to take the dust cup out.
2)
Press the dust release button to empty dust form the container.
2. How to clean the dust cup filter:
1)
Remove the dust cup from the main body.
2)
Twist anti-clockwise to remove the filter cover.
3)
Take out the sponge filter and high-efficient filter.
4)
Rinse them under the running cold water, and then air dry completely before placing them back in the dust
cup.
AIR DRY ONLY.
Clean the filter every two weeks or so (depending on usage). Do not use soap or other
cleaning solvents.
3. How to clean the brush roller
1)
Push the lock (1) out to unlock the brush roller (2) from the floor brush. Take it out and remove any dirt (hair
and other fibers) tangled around the roller.
2)
Wipe it clean only, do not use any soap or harsh cleaning solvents,
