- 5 -
SMG-124653 EN
PARTS DESCRIPTION
1.
Massage head
2.
Speed display lights
3.
Speed control button
4.
Ventilation holes
5.
Handle
6.
Battery indicator light
7.
Charging port
8.
Power switch on/off
9.
Small round head (Mainly used for large muscles)
10.
U-shaped head (Mainly used for neck and spine)
11.
Tower-shaped head (Mainly used for soft tissues and sensitive muscle groups)
12.
Flat head (Mainly used for various parts of the body)
13.
Cylinder head (Mainly used for deep muscle groups)
14.
Round head (Mainly used for various parts of the body)
15.
Charger
Massage head installation method:
While installing/pulling, the appliance should be in the standby/shutdown state.
–
Push the massage head into the appliance as far as possible to install it firmly.
–
Slightly rotate the massage head in any direction to pull it out from the appliance.
USAGE
1.
This massage gun is suitable for physical massage before or after exercise.
2.
Turn on the power switch; the green indicator light is on and the appliance is in standby mode.
3.
Press the speed control button to enter the first speed level; the appliance begins to run. Each time the
button is pressed, the speed level is increased by one level. Press the speed control button at the fifth speed
level, the appliance enters the standby mode. Five speed display lights correspond to the five speed levels.
4.
Turn off the power switch in any speed level, the appliance will stop immediately.
5.
After use, please turn off the power switch. Do not keep it in standby mode for a long time.
