emerio PAC-122838, Manual

Page: 11 / 107

- 10 -
The hot air exhaust hose is not connected
or blocked. Connect or clean the hot air exhaust
hose.
Temperature setting is too high. Reset the temperature.
Air inlet is blocked. Clean the air inlet.
Noisy
The ground is not level or not flat enough.
Place the appliance on a flat, level
surface if possible.
The sound comes from the flowing of the
refrigerant inside the appliance.
It is normal.
E0 Code Room temperature sensor failed.
Replace the room temperature sensor.
Contact authorized service technician
for repair.
E1 Code Condenser temperature sensor failed.
Replace condenser temperature sensor.
Contact authorized service technician
for repair.
E2 Code Water tank full when cooling.
Take off the rubber stopper and empty
the water.
E3 Code Evaporator temperature sensor failed.
Replace evaporator temperature sensor.
Contact authorized service technician
for repair.
TECHNICAL DATA
Notice: Operation temperature range:
Maximum cooling Minimum cooling
Dry bulb temperature /
Wet bulb temperature(
℃
)
35/24 18/12
Below data for your operating reference
Model PAC-122838 PAC-122839
Rated voltage 220-240V 220-240V
Rated frequency 50Hz 50Hz
Rated input 785W 1000W
Rated current 3.5A 4.5A
Cooling capacity
2050W
(7000Btu/h) 2600W
(9000Btu/h)
Moisture removal (L/H) 0.8 1.0
Air flow 320m³/h 320m³/h
ERP INFORMATION
Value Value
Trademark Emerio Emerio
Model identification PAC-122838 PAC-122839
Sound power (cooling)
≦
65dB(A)
≦
65dB(A)
Name of refrigerant R290 (0.14kg) R290 (0.16kg)
Rated power input for cooling (kW) 0.785
1.0
Rated energy efficiency ratio 2.6 2.6
GWP (kgCO
2
eq) 3 3
Energy efficiency class A A