emerio MC-111060, Manual

Page: 5 / 18

- 4 -
MC-111060 EN
GENERAL DESCRIPTION
1.
Motor unit
2. Jar
3. Blade support
4. Stainless steel blade
5. Turbo button
USE
1. Attach the blade on to blade support in the jar and pour in the food to be chopped.
Hard food must be cut into small pieces (about 2cm). Otherwise, the motor may block. Press “TURBO” for
processing.
2. Attach the removable lid on top of the jar and then the motor unit, plug the appliance in. Press down on the
motor unit, and the multi chopper starts up immediately.
3. After use, unplug the appliance and wait unit the blade stops completely. Remove the motor unit, the
removable lid and the blade.
Always make sure the motor unit in place; otherwise the unit will not function.
Take note of the following table:
Foodstuff Filling quantity Processing time Speed
Salami 130g 3 x 5 secs. Turbo
Cheese (Gouda, young,
refrigerator temperature) 100g 4 x 15 secs. Turbo
Carrots 100g 3 x 5 secs. Turbo
Dried fruit 130g 4 x 15 secs. Normal
Almonds 50g
Coarse: 1 x 10 secs.
Middle: 2 x 10 secs.
Fine: 3 x 10 secs.
Turbo
Eggs (hard boiled) 150g 2 x 4 secs. Turbo
Walnuts 50g 2 x 8 secs. Turbo
Warning: The appliance is only permitted to use one cycle continually. Before it’s used again, it must cool down
enough.
How to make a success of your mayonnaise?
Ingredients: 1 yolk, 1 teaspoonful of mustard, 1 tablespoonful of water, 1 tablespoonful of vinegar, 100 ml of oil,
salt, pepper.
-
Put the ingredients into the bowl and add 6 tablespoonful of the oil;
- Premix the ingredients in your multi chopper for 10 secs then add the remaining oil and operate for 10 secs.
It is important that all the ingredients are at the same temperature.