emerio HO-107774.1, Instruction Manual

Page: 6 / 31

- 5 -
HO-107774.1 EN
DESCRIPTION
1. Heating elements
2. Built-in handle
3. Thermostat knob
4. Indicator light
5. Base
ASSEMBLY
⚫
Do not operate the oil heater without correctly fixed base support.
⚫
To fix the rear support base, fit it tightly against the fin, until it stays in place.
⚫
To fix the front support base, fit it tightly against the bottom on the front panel.
⚫
After fixing the supports, ensure that the heater stands firmly on the floor.
USING THE APPLIANCE
Position the appliance in a safe place, freestanding with at least 90cm clearance.
⚫
Set the thermostat to the “ OFF ” position and insert the plug into the power supply.
⚫
Turn the thermostat control clockwise all the way round until you hear a click, this sound indicates that the
oil heater is activated, the indicator light is on. Continue turning the thermostat control clockwise to its
highest setting.
⚫
When the indicator light is on, the heater is activated. This light turns on and off repeatedly according to
the function of the thermostat. (Suitable for rooms up to 5 m
2
)
⚫
Turning the thermostat clockwise will always increase the set temperature; turning it anticlockwise will
decrease the set temperature. The thermostat will automatically turn the heater on and off to keep the
setting temperature.
NOTE:
⚫
The room must be in a good tight condition; if not, the heating results will be insufficient.
⚫
After use, turn the thermostat to the “ OFF ” position and unplug the appliance from the power supply.
SAFETY SYSTEM:
⚫
The appliance has a safety system which automatically switches off the unit when overheated.
⚫
If overheating occurs, remove the plug from the socket, and let it cool down for at least 30 minutes.
MAINTENANCE AND CARE
⚫
The oil heater should be cleaned regularly; wipe the dust off the surface of the fins. This improves
radiation.
⚫
Unplug the appliance from the power supply and allow the appliance to cool down completely.