emerio FN-214468.1, Instruction Manual

Page: 8 / 60

- 7 -
FIRST USE / OPERATION
1. Plug in the appliance. A beep sound will be heard. The digital display lights up with the symbol
“ “ illuminating and the battery indication flashing. The appliance is in standby mode.
2. To switch on and off:
Press the on/off button on the contol panel to start the appliance. The indicator light on the control panel
is illuminated. The digital display shows the wind speed value
”06” and the normal mode symbol ” ” is on.
Press the button again to turn off the appliance. The appliance will be in standby mode.
3. To set the wind speed:
Continuously press the wind speed button on the control panel to select the wind speed from 1 to 12 levels
circularly. The digital display shows the wind speed value accordingly.
4. To set the swing function:
Countinuously press the swing button on the control panel to select the swing angle: 30°
→ 60° → 90° →
120° → off → ... (repeating) The swing angle indication on the digital display will illuminate in green and
convert into a circle by adding the angle in sequence. You can also long press the swing button for approx.
2 seconds to turn off the swing function.
To use the remote control:
1. On/off button: the function of this button is the same as the function of the button on the control panel.
2. Swing button: the function of this button is the same as the function of the button on the control panel.
3. Timer button: press the timer button to enter the timer setting state.
4. Value increasing button and value decreasing button: press the button “+“ / “ - “ to adjust the va lue of the
wind speed and the timer.
-
Value of the wind speed: press the button “+“ / “ - “ directly to adjust the wind speed from 1 to 12.
- Value of the timer: press the timer button first to enter the timer setting state and then press the button
“+“ / “ - “ to adjust the shutdown time from 0 to 12 hours. Each press of the button “+“ / “ - “ will increase
/ decrease the timer value by 0.5h for 0-6 hours timer setting. Each press of the button “+“ / “ - “ will
increase / decrease the timer value by 1h for 6-12 hours timer setting.
After the timer is set, the digital display will show the wind speed value and the timer value alternately.
5. Mode button: press the mode button to select the wind blowing mode from normal mode ” ” → natural
mode “ “ → sleep mode “ “ → ... (repeating) The fan can automatically and intelligently adjust the wind
blowing state of the natural mode and the sleep mode.
Memory function:
This appliance is equipped with a memory function. The unit will retain the wind speed, wind blowing mode and
swing function of the former settings when turn on the unit again.
Power supply mode of battery:
This appliance can work without the power cord after charging. Pull out the power cord from the base. Press
the battery control button (G). A beep sound will be heard. It indicates the appliance is in power supply mode
of battery. Now you can press the on/off button to start the fan.
G