emerio FN-108774.1, Instruction Manual

Page: 5 / 24

- 4 -
FN-108774.1 EN
PARTS DESCRIPTION
1.
Front guard
2. Fan blade
3. Blade fastening screw
4. Fixation screws for rear guard
5. Rear guard
6. Handle
7. Motor shaft
8. Speed control switch
9. Oscillation knob
10. Motor unit
11. Connecting screw and nut
12. Height adjustment pipe
13. Height adjust knob
14. Standing shaft
15. Standing base
16. Weight support
17. Fastener
18. Base locking screw
19. Grill locking screw
20. Nut
ASSEMBLY INSTRUCTIONS
** Please assemble correctly by the following order when using.
1.
The stand assembly

Put the standing shaft into the center of standing base.

Place the weight support to the bottom of the base. Tighten the weight support to the base with fastener and
base locking screw.
2.
Fan head assembly

Pull the height adjustment pipe out to your desired height and tighten the height adjust knob.

Place the motor unit on the top of height adjustment pipe. Use the connecting screw and nut to tighten the
connection.
3.
Rear guard assembly

Fit the rear guard onto motor with the handle on the top. Tighten the rear guard with 4 fixation screws.
4.
Fan blade assembly

Install fan blade onto motor shaft and use the blade fastening screw to fix the blade.
5.
Front guard assembly

Put the hook of the front guard onto the top of rear guard.

Attach front guard to rear guard, close clips and use the grill locking screw to secure the two grilles together.
Fix with the nut.