- 5 -
FH-124239.1 EN
PARTS DESCRIPTION
1.
Thermostat control switch
2.
Air outlet grille
3.
Heat select switch
4.
Indicator light
Heat setting:
“
0
”
position – OFF
– Ventilation
– WARM AIR (low heat output)
– WARM AIR (high heat output)
THERMOSTAT
1.
Rotate the switch to choose the suitable setting --- Ventilation/ WARM AIR (low heat output)/ WARM AIR
(high heat output).
2.
Turn the thermostat to choose the temperature, the heater begins to work.
3.
The thermostat will turn the heater off when the selected room heating is achieved, and when the
temperature drops it will turn on again automatically.
Note:
⚫
To switch off the appliance, it is recommended to turn the heat switch to ventilation setting for about 120
seconds to cool down. After that, please turn the heat switch to “0” position and then unplug the appliance.
This can help prolong the lifespan of the appliance.
SAFETY SYSTEM
⚫
The appliance has a safety system which automatically switches the unit off when overheated.
⚫
If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down for at
least 10 minutes. Put the plug in the socket and switch the heater on.
MAINTENANCE
⚫
The fan heater only needs regular cleaning on the outside.
⚫
Before you clean the unit, turn the switch off. Remove the plug form the socket and wait until the fan heater
cools down completely.
⚫
Use a dry cloth to wipe the heater housing.
⚫
Do not use detergents, abrasive cleaning liquids or chemicals (alcohol, gasoline etc.) to clean the appliance.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption: 2000W
Summary of Contents for FH-124239.1
Page 1: ......
