- 6 -
WALL MOUNTING
There is a pack of accessories provided with the appliance. Please use them for wall mounting according to
below illustrations. Before installation, make sure the appliance is turned off and disconnected from power.
1.
Use the supplied installation template (a) to mark the position of the holes on the wall.
2.
Drill holes using a 8mm drill.
3.
Insert the plastic expansion bolts into the holes.
4.
Screw the 4pcs screws into the plastic expanison bolts.
5.
Mount the appliance on to the screws.
6.
Move the appliance to the right and then down unitl it’s secured.
NOTE: The kit supplied in the package is designed for mounting vertically on a solid wall. The heater must be at
least 20 cm removed from all objects, walls, etc.; the distance to the floor must be at least 20 cm and there
must be at least 20 cm above the heater.
OPERATION
Plug the appliance into an appropriate electrical outlet. Power on the appliance by pressing the power switch
to position “I”. The power switch will be illuminated. LCD display lights up and shows “OFF”. The appliance is
standby. Press the on/off button “
” to turn on your appliance.
1.
Temperature calibration
Long press the button “+” for 5 seconds to enter the temperature calibration, adjusting the number by
pressing button “+” or “-“. The calibration ranges from -5 to +5 degrees.
