DPSI BMS Operating Manual
Version 1.0
Page 26 of 32
11. Programming the DPSI BMS
Some options of the DPSI BMS can be adjusted through simple
programming. In addition to the selection of the displayed language,
battery 2 can be shown or hidden (available only for the 2 channel
version).
For programming, both and
buttons are pressed simultaneously
during turning the DPSI BMS on. Keep the and
buttons pressed.
After approx. 5 seconds, programming mode is entered which works as
follows.
If both arrow keys were pressed for
5 seconds during turning on,
programming mode starts. After
releasing, the next display appears:
Indication of the LC display can
take place in German or English.
After 2 seconds, display changes
to the selection of the language:
Press the button for German, for
English press the button. If there
is no key pressed at all, the next
programming option is displayed
(without change of the currently
selected language).
This menu allows for the activation
or deactivation of battery 2. Only
available for the 2 channel version!
