Locating Beeper Operating Instructions
Version 1.0
Page 7 of 20
3. Functionality
There are several options for activating the alarm:
•
A defined servo position, e.g. by a switching channel of the
transmitter (servo position < -100%)
•
The defined servo position of a servo which is connected in
parallel to the Locating Beeper (e.g. choke servo or tow
release)
•
Failsafe setting of the servo position (e.g. turning the
transmitter off)
•
Missing or erroneous servo signal (e.g. turning the transmitter
off)
•
Suddenly missing external supply (PRO-version only)
The receiver does not deliver a servo signal (PPM modulation) if the
pilot turns the transmitter off. This is recognized by the Locating
Beeper which then will signal alarm.
Summary of Contents for Locating Beeper
Page 1: ......