EMC2 302-000-589, Disassembly Instructions Manual

Page: 18 / 35

18
WEEE Disassembly Instructions for the Li Ion (SPS), doc #302-000-589
Material Item Location
Equipment containing gases that are ozone-depleting or
have a global warming potential (GWP) about 15, such as
those contained in foams and refrigeration circuits Absent
Ammonia-water solutions containing chromium VI
(Hexavalent Chromium) in the case of absorption
refrigerators Absent
Any other liquid, such as oils and acids in particular Absent
Components containing refractory ceramic fibers Absent
Photo-conducting drums containing cadmium or selenium Absent
11.1 Materials of Interest to Recyclers
Table 11 lists materials for recycling. To locate specific items, refer the tables and images in 8.0
Product Photos and 9.0 Locating Materials .
Table 11. Complete list of Recyclable Materials
Material Item Location
Non-ferrous Alloys 3a SPS main PCB, heatsinks, aluminum
3b SPS main PCB copper coils
2j
SPS chassis internal wire harness.
(copper red and black wires)
1j Nickel battery connectors
1f Copper bus bar, large
1g Copper bus bar, small
Ferrous Alloys 2a SPS chassis lid, screws/fasteners
2b SPS chassis frame, screws/fasteners
1 Battery screws/fasteners
ABS 2d Fan assembly, ABS plastic
Polyethylene Terephthalate (PETE or PET) Absent
High-Density Polyethylene (HDPE) Absent
Polyvinyl Chloride (PVC) Absent
Low-Density Polyethylene (LDPE) Absent
Polypropylene (PP) Absent
Polystyrene (PS) Absent
Other plastics, (e.g. acrylic; polycarbonate; nylon;
fiberglass)
1e Battery-pack connector
1h Battery light pipes
2e Plastic battery-pack rails (4)