EMC2 302-000-589, Disassembly Instructions Manual

Page: 17 / 35

17
WEEE Disassembly Instructions for the Li Ion (SPS), doc #302-000-589
11.0 Reportable Materials
Table 10 lists components that require selective treatment. To locate specific items, refer the tables
and images in
8.0 Product Photos and 9.0 Locating Materials .
Table 10. Complete list of Reportable Materials
Material Item Location
Polychlorinated biphenyl (PCB) containing capacitors and
all Polychlorinated Terphenyl (PCT) containing electrical
equipment Absent
Mercury – containing components such as switches or
backlighting lamps Absent
Batteries & Accumulators 1c 48 Rechargeable Lithium-ion batteries
Printed circuit boards of mobile phones generally, and of
other devices if the surface of the printed circuit board is
greater than 10 cm
2
1d Battery, main PCB
1e Battery, connector PCB
2f SPS Connector PCB
3 SPS main PCB
Ink & toner cartridges, liquid and pasty, as well as color
toner Absent
Plastic containing brominated flame retardants Absent
Asbestos waste and components which contain asbestos Absent
Cathode ray tubes Absent
Chlorofluorocarbons (CFC), Hydrochlorofluorocarbons
(HCFC), Hydrofluorocarbons (HFC)or,
Hydrocarbons (HC) Absent
Gas discharge lamps Absent
Liquid crystal displays (together with their casing where
appropriate) of a surface greater than 100 cm
2 and all
those back-lighted with gas discharge lamps
Absent
External electric cables See
Table
8 AC power cord
Embedded electric cables
2j
SPS chassis internal wire harness.
(copper red and black wires)
Components containing radioactive substances, or
materials that become radioactive as a result of the
function of the product, such as ionizing radiation Absent
Electrolytic capacitors containing substances of concern
(height > 25 mm, diameter > 25 mm or proportionately
similar volume) 3c SPS main PCB