EMC Ionix SCA, Installation Quick Reference

Page: 7 / 12

7
Install the appliance in a rack or cabinet
Take the appliance out of the box and mount it into the rack as follows:
1. “Mounting kit parts” on page 7
2. “Removing inner rails from the universal rail kits” on page 7
3. “Attaching the inner rails” on page 8
4. “Installing the universal rails in the cabinet” on page 8
5. “Installing the appliance in the cabinet” on page 9
6. “Installing Bezels” on page 10
Mounting kit parts
The appliance mounting kit includes rails, hardware, and bezel as
listed in the table below.
You will need a # 2 Phillips-head screwdriver to complete the
installation of the rails and appliance(s)
Removing inner rails from the universal rail kits
Figure 3 on page 8 shows how to remove the inner rail from each rail
assembly.
1. Pull the blue inner rail release button, and extend the inner rail to
the lock position.
Table 3 Enclosure mounting kit materials
Component Use
2 adjustable universal slide rails. Includes
inner rails for connection to appliance. Attach front to back on either
side between NEMA channels
2 Phillips M5 18mm screws Stabilize the rail mounting
1U bezel (front rack panel)
1 per appliance- application
specific