EMC DL3D 1500, Administrator'S Manual

Page: 68 / 238

68 EMC DL3D 1500 and DL3D 3000 Administrator’s Guide
Configuring and Managing Virtual Tape Libraries
Managing virtual tape libraries
You can manage the virtual tape libraries in the following ways:
◆
To change the de-duplication mode from immediate to schedule
and vice versa, or to change the backup window for scheduled
de-duplication, see
“Editing a virtual tape library” on page 68 .
◆
To delete a virtual tape library, see “Deleting a virtual tape
library” on page 69 .
◆
To place a VTL in the offline or online state, or move its media
from a slot/drive/or IE slot, or unload media, see
“Managing
virtual tape library actions” on page 70 .
◆
To view all the available virtual tape cartridges and their details
or export, recycle, delete, or import virtual media, see
“Managing
media actions” on page 72 .
◆
To view a list of SAN clients, see “Managing SAN client groups”
on page 74 .
◆
To edit SAN client groups, see “Editing a SAN client group” on
page 75 .
◆
To delete SAN client groups, see “Deleting a SAN client group”
on page 75 .
Editing a virtual tape library
Editing an existing virtual tape library consists of changing its
de-duplication mode (immediate or scheduled), and backup window
(for scheduled de-duplication). To edit a virtual tape library:
1. Set the DL3D 1500/3000 virtual tape library to be edited to the
offline state. The section “Changing the mode” on page 70
contains more information.
2. On the Virtual Tape Libraries Configuration page, select the
virtual tape library to edit or click Edit.
The Edit Virtual Tape Library page appears.
3. Edit the virtual tape library information as desired.
4. Click Apply.