manualshive.com logo in svg

EMC DL3D 1500, Administrator'S Manual

Share
Download
EMC DL3D 1500 Administrator'S Manual Download Page 166

166

EMC DL3D 1500 and DL3D 3000 Administrator’s Guide

Managing Utilities

Accessing utilities

To access the Utilities page, in the contents frame, click Utilities.The 
management frame displays the Utilities page. The Utilities page 
contains:

◆

Firmware

◆

Analyzer

◆

Diagnostics

◆

Node management

◆

License keys

Firmware

Use the Firmware Upload page to upload a new firmware image to 
the DL3D 1500/3000 appliance.

To upload a new firmware image:

1. Access the Utilities page. 

“Accessing utilities” on page 166

 

contains more information.

2. Click Firmware.The Firmware page appears.

3. Type the location and filename of the new software image.

Note: 

Use Browse to locate the new firmware image.

4. Click Upload to place the new software image in a temporary 

area of the system.

A Successful Upload page appears indicating that the firmware 
has been uploaded. Click OK to continue.

5. Click Activate to activate the new firmware image or Remove to 

remove the firmware image from the system.

An Information page appears indicating that the firmware has 
been either activated or removed.

6. Click OK to return to the Utilities page.

The DL3D appliance will use the new firmware image the next time 
the system is rebooted. 

Summary of Contents for DL3D 1500















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands