EMC Connectrix ED-64M, User Manual

Page: 113 / 476

4
Using the Node List View
4-27
Monitoring and Managing the Director
Using the Node List View
To display the Node List view (Figure 4-8), select the Product
Manager Node List tab.
This view displays information about all node attachments to any
F_Ports on the director, sorted by port number. All data is updated
automatically as devices log in and out.
Figure 4-8
Node List View
Information for each node includes:
◆
Port # — Port number: 0 through 63.
◆
Address :
• Open Systems mode — Displays the Fibre Channel address of
the node.
• FICON mode — Displays the logical address of the port. The
address equals the port number, plus 4. For example, the
address for port 0 is 4 (0+4). If port addresses have been
swapped, those addresses will be followed by an asterisk (*).