EMC Connectrix DS-32M2, User Manual

Page: 110 / 356

4
4-38 Connectrix DS-32M2 User Guide
Monitoring and Managing the Switch
Clearing Link Incident
Alerts
Although you can clear the yellow triangle from the Hardware view
and the alert description in the Port Properties window manually,
they may also be cleared by actions outside of your control (such as
on Connectrix service processor reboot).
You can clear the yellow triangle from the Hardware view and the
description in the Link Incident field manually. Right-click the port
and select Clear Link Incident Alert(s) from the menu. In the Clear
Link Incident Alert(s) window (Figure 4-10), select an option and
click OK.(If there are no link incident alerts enabled for a port, no
actions occur.) Be aware that clearing the incident indicator clears it
for everyone using the system.
Figure 4-10 Clear Link Incident Alert Window
Threshold Alerts A threshold alert notifies Product Manager users when the transmit
(Tx) or receive (Rx) throughput reaches specific values for switch
ports or port types (E_Ports or F_Ports).
Threshold alerts occur as the following in the Product Manager:
• An attention indicator (yellow triangle) that appears on the port
card in the Hardware view.
• An attention indicator (yellow triangle) that appears in the Alert
column of the Port List view.
• An attention indicator (yellow triangle) that appears by the
Threshold Alerts
field in the Port Properties window.
• Detailed threshold alert data recorded in the Threshold Alert Log.
For more information on threshold alerts, refer to Configuring
Threshold Alerts on page 5-33.