Mounting on Glass
INSTALLATION GUIDE
20
1.
Remove the mount plate, rear cover and
3M adhesives from the Wall/Glass mount
packaging as shown below.
2.
Peel one side of the plate adhesive and
apply it to the back of the wall plate. Do the
same for the rear cover as shown below.
3.
Peel the other side of the plate adhesive
and place the mount plate into position on
the glass surface following the note above.
Note: When applying adhesive stickers to a surface
be sure to first clean the surface and apply at least
10 seconds of pressure when applying.
Wall/Glass Mount
(SKU: MNTMAG01)