Page | 82
2.
Extract [CD\WINCE700\BSP\COMMON_TI_V1.rar] to
[C:\WINCE700\PLATFORM\COMMON\SRC\SOC].
3.
Extract [CD\WINCE700\BSP\3rdParty.rar] to [C:\WINCE700].
4.
Extract [CD\WINCE700\BSP\powerVR.rar] to
[C:\WINCE700\public].
5.
Extract [CD\WINCE700\project\SBC8600.rar] to the
[C:\WINCE700\OSDesigns] directory.
Note:
The default installation path of the Windows Embedded Compact 7 in this
context is [C:\WINCE700].
7.4.3
Sysgen & Build BSP
Below are the steps given for building Sysgen and the BSP:
1
）
Open the existing project file SBC8600.sln located in
[C:\WINCE700\OSDesigns\SBC8600].
1.
Click [Build-> Build Solution] in vs2008 to sysgen and build BSP.
2.
Images including MLO, EBOOTSD.nb0, NK.bin will be created
after the sysgen phase and the build phase are finished
successfully, Copy the files MLO, EBOOTSD.nb0, and NK.bin
Located
in
[C:\WINCE700\OSDesigns\SBC8600\SBC8600\RelDir\AM33X_
BSP_ARMV7_Release] to the TF card.
3.
Insert the TF card into the device and boot the device for a test.
Summary of Contents for SBC8600B
