background image

 

   

Hardware Features

 

The AT91SAM9G45 embedded microprocessor is based on the integration of an ARM926EJ-S 
processor with fast SRAM, and a wide range of peripherals. It is designed to provide a high 
performance processor solution with a high flexibility for general and multimedia oriented 
applications. The internal multi-layer bus architecture associated with a multi-port DDR2, a 32-bit 
External Bus Interface and 64KBytes of internal SRAM allows the SAM9G45 to sustain the high 
bandwidth required by its high speed peripherals. The AT91SAM9G45 power management (APMC) 
features an efficient clock gating which, associated with the ARM926EJ-S low power modes, greatly 
reduces power consumption under all conditions of use. 
 
To reduce the overall system cost, the AT91SAM9G45 integrates many hardware peripherals such as 
High Speed (480 Mbps) USB Device and Host with transceivers, a 10/100 Mbps Ethernet controller, a 
High Speed Multimedia Card interface, an LCD controller supporting STN and TFT displays up to 
1280*860, a camera interface and several communication peripherals such as USARTs, Serial 
Synchronous Controllers and Two Wire Interface. All these peripherals are DMA oriented, reducing 
the CPU overload. 
 
The SBC6245 has a CPU board Mini6245 integrated with AT91SAM9G45 microcontroller, Nand 
Flash, EEPROM and DDR2 SDRAM on it, which exposes many of these features to the user 
in support of developing specific solutions. The CPU board can be mounted directly onto the 
expansion board through two 1.27mm pitch 80-pin expansion connectors. This board is characterized 
as follows: 
 

The SBC6245 CPU Core Board (Mini6245)

 

 

                 

 

Mini6245 Top-view                        Mini6245 Bottom-view 

 

y

 

Dimension: 70mm x 49.9mm 

y

 

Working temperature: -10

~+70

 

y

 

Atmel AT91SAM9G45 ARM926EJ-S Core Microprocessor (compatible with AT91SAM9M10)

 

 

- 32 KBytes Data Cache, 32 KBytes Instruction Cache, MMU 
- One 64-kbyte internal SRAM and One 64-kbyte internal ROM 
- Can work at up to 400MHz 

y

 

External Memory 

- 128Mbyte (64MB*2) DDR2 SDRAM 
- 128Mbyte NAND Flash 

Reviews: