Embest LCD8000-70T, Quick Start Manual

Page: 4 / 11

Embest Technology
Copyright © 2014 Embest Technology RIoTboard LCD8000-70T Quick Start Guide
2
LCD8000-70T Display Configuration
1
）
The connection of LCD8000-70T and RIoTboard will be finished through the LCD-Ex
extension board, the way of which can be seen as below:
Figure 1 Hardware Connections
Mote:

On using 50PIN FPC cable to connect LCD and LCD-Ex, the blue side should be
upward;

It does not support the powered plug-in and plug-out.
2
）
Please connect the red, green and black wires of UART8000-U respectively to the
corresponding pins of J18 connector on RIoTboard as illustrated in the following
figure;