10
Before First Use
Remove any packaging and promotional
material from the EmberCeptor AV™
device and EmberSensor.
Setting Up the
EmberCeptor AV™
Identify Audio Visual (AV) equipment
that requires constant power for timers,
program guides and recording features,
and plug them into the socket marked
‘Always On’.
Identify Audio Visual (AV) equipment
that can be automatically switched off
and then plug them into the socket
marked ‘Power Saver’.
NOTE: Where there is more than
one appliance that needs to be
connected, any power board,
powerstrip, trailing socket or
surge board may be connected
to this socket.
Using Your EmberCeptor AV™
Connect the supplied EmberSensor cable
to the underside of the EmberCeptor AV™.
Fig. 1
Place the EmberSensor in a convenient
location that is in line of sight. Close to
your television is the best position, and
within normal operation of your existing
remote control(s).
Plug the EmberCeptor AV™ into a 220V-230V
wall socket in Europe, or into a 120V wall
socket in US, and turn the power point on at
the wall (if the wall outlet has a switch).
NOTE: Only equipment connected
to the EmberCeptor AV™ will be
protected against surge.
