EPIA-M700 User’s Manual
9
9
9
9
Memory Module Installation
Memory Module Installation
Memory Module Installation
Memory Module Installation
Memory Slot: DDR2 DIMM
The VIA EPIA-M700 mainboard provide one 240-DIMM slot for DDR2
667/533 SDRAM memory modules and supports memory sizes up to 2GB.
DDR2 SDRAM Module Installation Procedures
•
Locate the DIMM slot in the motherboard.
•
Unlock a DIMM slot by pressing the retaining clips outward.
•
Align a DIMM on the socket such that the notch on the DIMM
matches the break on the slot.
•
Firmly insert the DIMM into the slot until the retaining clips
snap back in place and the DIMM is properly seated.
Available DDR2 SDRAM Configurations
Refer to the table below for available DDR2 SDRAM configurations on
the mainboard.
Slot
Slot
Slot
Slot
Module Size
Module Size
Module Size
Module Size
Total
Total
Total
Total
DIMM1
64MB, 128MB, 256MB, 512MB, 1GB, 2GB
64MB - 2GB
Maximum supported system memory
64MB - 2GB
Summary of Contents for EPIA-M700
Page 13: ...EPIA M700 User s Manual 5 5 5 5 1 8V 1 1 21 12 0 2 40 Compact Flash Bottom side ...
Page 28: ...EPIA M700 User s Manual 20 20 20 20 This page is intentionally left blank ...
Page 38: ...EPIA M700 User s Manual 30 30 30 30 IDE Channel 1 Master IDE Channel 1 Slave ...
Page 70: ...EPIA M700 User s Manual 62 62 62 62 This page is intentionally left blank ...