III
Safety Precaution
Do’s
o
Always read the safety instructions carefully.
o
Keep this User's Manual for future reference.
o
All cautions and warnings on the equipment should be
noted.
o
Keep this equipment away from humidity.
o
Lay this equipment on a reliable flat surface before setting
it up.
o
Make sure the voltage of the power source and adjust
properly 110/220V before connecting the equipment to the
power inlet.
o
Place the power cord in such a way that people cannot
step on it.
o
Always unplug the power cord before inserting any add-on
card or module.
o
If any of the following situations arises, get the equipment
checked by authorized service personnel:
o
The power cord or plug is damaged.
o
Liquid has penetrated into the equipment.
o
The equipment has been exposed to moisture.
o
The equipment has not worked well or you cannot
get it work according to User's Manual.
o
The equipment has dropped and damaged.
o
The equipment has obvious sign of breakage.
Don’ts
o
Do not leave this equipment in an environment
unconditioned or in a storage temperature above 60°C
(140°F). The equipment may be damaged.
o
Do not leave this equipment in direct sunlight.
o
Never pour any liquid into the opening. Liquid can cause
damage or electrical shock.
o
Do not place anything over the power cord.
o
Do not cover the ventilation holes. The openings on the
enclosure protect the equipment from overheating
Summary of Contents for amos-1000
