USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20 cm
separation with the antenna while this end product is installed and operated. The end user has to be
informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be
satisfied.
The end user has to also be informed that any changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate this equipment.
If the labelling area is small than the palm of the hand, then additional FCC part 15.19 statement is
required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation
is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause undesired
operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
Z9E-EW5270UM ".
If the labelling area is larger than the palm of the hand, then the following FCC part 15.19 statement has
to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Antenna Information:
Gain (dBi)
True Gain (dBi)
Ant.
Brand
Model Name
(Part Number)
Antenna Type Connector
2.4GHz
5GHz
Cable
loss
2.4GHz
5GHz
1
AIR802
ANRD245X05
Dipole
Antenna
RP-SMA
5
5
0.4
(Black
cable)
4.6
4.6
2
taoglas
GW.71.5153
Dipole
Antenna
RP-SMA
3.8
5.5
0.4
(Rose
gold
cable)
3.4
5.1
Note: The Printed Antenna of the EUT wasn't used.
Chain 1 connect to Ant.1 or Ant. 2, Chain 2 connect to Ant.1 or Ant. 2.