Embedded Systems LM5 Lite, Manual

Page: 10 / 10

Embedded Systems SIA © 2021 www.logicmachine.net
LM5Lp2
Data sheet / Issue date 26.11.2021 Page 10 / 10
Quick startup guide
1) Mounting the device on DIN rail
2) Connect the KNX bus cable
3) Connect 24V power supply to the device (either through separate 24V screw terminals or
through Passive 24V DC Power-Over-Ethernet)
4) Connect Ethernet/LAN cable coming from the PC
Default IP configuration
Login name admin
Password admin
IP address 192.168.0.10
Network mask 255.255.255.0
Reset device
You can either reboot the device by pressing RESET button or reset the configuration to factory
defaults:
•
Press and hold for <10 sec – reboot the device
•
Press and hold for >10 sec – reset networking with IP to factory default
•
Press and hold for >10 sec and again press and hold for >10 sec – full reset of configuration
to factory defaults