PAGING
CONTENTS
Paging is accomplished by typing the two-digit ID of the pager into the
base numeric keypad. The numbers will show up at the bottom of the
base unit display. To clear the current input line, press the “
del
” key at
any time.
After entering the two-digit pager ID, press one of the following keys:
“
Page
” key allows the entire party to be paged. The pager ID will
flash between the ID and the letter “P” on the base unit display.
Optional songs, animation, vibrations and flashing lights may notify
the patron.
“
One Page
” key allows you to request that only one person from the
party approach the podium. The pager ID will flash between the ID
and the letter “p” on the base display. The patron will be notified.
For each of the preceding types of pages, a confirmation or failure will
be displayed on the base unit display after a 5-7 second attempt.
When confirmation is shown, the pager has received the page!
Should a page attempt fail, the base will continue to notify the pager at
a lower priority. To cancel a page, enter the two-digit ID of the pager
and press “
Cancel Page
”. The base unit display will show a
confirmation of the cancellation and the pager will return to normal
operation.
The “
Check Page
” key can be used to confirm the proximity of a
pager. No notification is provided to the patron. The base unit display
will provide a confirmation that the pager is within range if it responds
to the check.
Installation………………………………………………………. 1
Operation………………………………………………………... 2
Paging…………………………………………………………… 3
Trouble Shooting…....…………………………………………... 4
3
