1)
DHCP:
After enable the DHCP function, set static IP address is not available, according to
the DHCP server automatically access to a valid IP address.
2)
IP Address: Input corresponding digital number to modify IP address.
3)
Subnet Mask: Input corresponding IP subnet mask.
4)
Default gateway: Input corresponding gateway address.
5)
Primary DNS Address: Enter the local network operators configure DNS service address.
6)
Secondary DNS Address: Enter the local network operators configure DNS service alternate
address .
7)
MAC: Display physical address of current network interface.
8)
Remote Port: Input corresponding device port(default is 5050).
9)
HTTP Port: Input corresponding port(default is 80).
10)
Multicast Address: Input corresponding multicast address.
Explanation: When the network parameters change will pop-up prompts whether or
not to manually or automatically IP channel.
9.7.2.1
Platform
In “Management Platform” page, you can set up whether access UC2 video surveillance client and
platform server, as shown below: