Emax WEC-19W4, Manual

Page: 8 / 11

Danish, DA SO MA TI ON TO FRE LO
Russian, RU BC ПН BT CP ЧТ ПТ СБ
 Press “ ” to confirm your setting and to end the setting procedures, enter the clock mode.
F.Y.I.:
 After 20 seconds without pressing any button, the clock switches automatically from Set Mode to Normal Time Mode.
 There are 8 languages of Weekday: English, German, Italian, French, Spanish, Dutch, Danish and Russian
 When the WIFI connection is successful, the time will be automatically updated to the network time, the symbol “ ”
will display, at the time of setting, time and time zones are not to change.
Setting the daily alarms:

Press once “ ” button, the display conversion to alarm activation mode.
I

Press and hold down “ ” button for 2 seconds until Alarm Time hour display starts to flash. Use the“ ” and
“ ”buttons to set the required hour.
 Press “ ” button to confirm your setting, the Minute display starts to flash. Use the “ ” and “ ” buttons to set the
required minute.
 Press “ ” button to confirm your setting, the snooze time of the Alarm starts to flash. Use the “ ” and “ ” buttons
to set the minute of snooze you need.
 Press “ ” button to confirm your setting and to end the setting procedure
F.Y.I.:

After 20 seconds without pressing any button the clock switches automatically from setting mode to Normal clock
mode.
Alarm ON/OFF
 The alarm shift switch is pushed in the “ ” position, LCD display the “ ” icon, the alarm function is open, at the
same time, the sound of "BI" sounded.
 Product back of the alarm shift switch is pushed in the “ ” position, the “ ” icon disappears, the alarm function is
close
F.Y.I.:

The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm will be
repeated automatically after 24 hours.
 Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is heard.
 The snooze time setting range: 5 ~ 60MIN, OFF, when set to OFF, means no snooze function. Snooze time unit is
minutes.

While the alarm is sounding, press any button except the “ ” button or touch the " " field for more than 3
seconds to stop the alarm signal.
Snooze Function:
 While the alarm is sounding, Touch the " " field once to activate the snooze function. The alarm signal sounds
again after already been set.