Nighthawk Pro
www.emaxmodel.com
６
Required Tools and Equipments
1、Battery with XT60 connector (Suggested battery size: 3-4S 1300-1800mah 35C) For fly safety and
main board power range, suggest propellers 5-6inches under 3S and propellers 5inches under 4S.
2、1.5MM, 2.0MM, 2.5MM hex driver, tweezers, needle nose pliers, scissors, etc...
3、Computer or Laptop
4、Monitor and/or goggles.
5、Transmitter (ARF model ONLY)
Installation Steps
Step 1 Preparation
Take out the frame from the package and put it on a horizontal plane (like table). Plug it to computer by USB cable.
Step 2 Driver and Configuration Software Installation
1
、
Install Driver
Please install the drive program to your computer if you donot have it already.
（1）
Please choose the compatible driver for your computer, link
http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx
（2）
Install the drive program on your computer.
（3）
Please switch the ESC switch to ON
（4）
Connect flight controller to computer with Micro USB cable
（5）
Follow steps to install the driver.
2
、
Install Configuration Software
（1）
Please install Google chrome web browser.
（2）
Open Google Chrome web browser, go to "Chrome Web Store" and search BaseFlight - Configurator.
（
3
）
Add " BaseFlight - Configurator" App.
Note: Installing Cleanflight Configurator is similar to Baseflight Configurator, we will not discuss it in this manual
