4
emax-usa.com
Notice:
If you change to an illegal channel using SmartAudio, there will be no image
transmitting from Hawk 5 PRO. To switch back to a legal channel, press the button
on the vtx and follow the vtx menu guide shown below.
CE and FCC unlicensed user chart
Unlocked FCC HAM licensed user chart
* From the factory this video transmitter is designed to operate within CE and FCC
unlicensed users specifications. To use the unlocked features of this VTX the user is
required to have a HAM radio license or prior consent from the FCC. By purchasing
this equipment, the user is agreeing that they understand these responsibilities and
will operate the equipment legally. Emax cannot be held responsible for your actions
if you purchase and/or use this product in violation of your government's regulations.
Changing VTX setting via Betaflight OSD
Hawk 5 PRO is equipped with SmartAudio and is already configured with stock
settings. The SmartAudio line is operated on UART 6 TX.
1. Power on Hawk 5 PRO, goggles, and controller.
2. Follow the tips on screen to enter the main settings menu: THROTTLE MID+ YAW
LEFT+ PITCH UP to enter OSD parameter adjustment menu. as shown in Figure 2.
3. In the menu interface, switching PITCH up/down to choose menu option. Move the
cursor to
“FEATURES” and stir Roll stick right to enter next menu. Using PITCH stick
to move cursor to
“VTX SA”, as shown in Figure 3.Then pull ROLL stick right to enter
VTX configuration menu, as shown in Figure 4.
Figure 1
Figure 1