(In Bluetooth mode)
Phone Controls
Line-In
Bluetooth Pairing
Disconnect Bluetooth
MicroSD Playback
MicroSD/AUX Toggle
Customer Support
Answer Call/ End Call
Pair Bluetooth
Cancel Dial
Hold multi-function button for 2 seconds to
switch between MicroSD card mode and
AUX mode.
To submit a request, fill out the required
information online. You will be provided a
ticket number regarding your issue, which
you can refer to when contacting us further.
To redial last number double-click the button.
To reject calls hold button for 2 seconds
To use line-in, switch MODE to SD/AUX.
Then press the multi-function button.
To use MicroSD Playback, switch the
speaker from MODE to SD/AUX. Then press
the multi-function button .
1. Switch MODE to Bluetooth mode. The
speaker will say, “Bluetooth mode”. The
LED Light will flash blue 5 times.
2. Short press the multi-function button. The
LED light will flash green to indicate
bluetooth pairing.
3. Follow the Bluetooth instructions on your
cell phone to pair with the speaker.
4. When the speaker is discoverable, tap on
“ESB107”. Wait for the device to connect.
5. The speaker will say, “Bluetooth connected”
when your device is connected. The LED
Light will be blue.
When you disconnect from the speaker, it
will say, “Bluetooth disconnected”. The
speaker will flash green when disconnected
from bluetooth.
Visit ematic.us/support for customer service
regarding your device.
©2014 Ematic. All Rights Reserved. Bluetooth and the
Bluetooth logo are trademark of Bluetooth SIG, Inc and
used by Ematic under a license. 1 Year warranty from the
date of purchase, 90 days only on labor.
