Emakefun RF-NANO, Operating Instructions Manual

Page: 30 / 34

Copy right © 2018 Shenzhen Emakefun Technology co., Ltd.
30
void loop ()
{
Mirf . payload = sizeof ( value1 );
Mirf . channel = 10 ; //Set the channel used
Mirf . config ();
if ( Mirf . channel == 10 )
{
Mirf . setTADDR (( byte *) "FGHIJ" ); //Set the receiver address
value1 = 100 ;
Mirf . send (( byte *)& value1 ); //Send instructions, send random number value
Serial . print ( "Wait for sending....." );
while ( Mirf . isSending ()) delay ( 1 ); //Until you send successfully, exit the loop
Serial . print ( "value1 Send success:" );
Serial . println ( value1 );
delay ( 500 );
}
Mirf . payload = sizeof ( value2 );
Mirf . channel = 20 ; //Set the channel used
Mirf . config ();
if ( Mirf . channel == 20 )
{
Mirf . setTADDR (( byte *) "KLMNO" ); //Set the receiver address
value2 = 200 ;
Mirf . send (( byte *)& value2 ); //Send instructions, send random number value
Serial . print ( "Wait for sending....." );
while ( Mirf . isSending ()) delay ( 1 ); //Until you send successfully, exit the loop
Serial . print ( "value2 Send success:" );
Serial . println ( value2 );
delay ( 500 );
}
}