Emakefun BLE-Nano, Operating Manual

Page: 38 / 43

Copy right © 2018 Shenzhen Emakefun Technology co., Ltd.
38
AT+ MODE=<Param> OK+ WorkMode=<Param>
+SUCCESS
0: unvarnished transmission
1: driving pattern
2:iBeacon
18
、
Set bluetooth USB and bluetooth data transfer modes
Command Response Parameter
AT+ BLEUSB=<Param> OK+UsbBleTransmitMode=<Param>
+SUCCESS
0:close
1:USB Serial data to BLE
2:BLE data to USB
串口
3:USB Serial data and
BLEunvarnished transmission
19
、
Set the bluetooth transmission power
Command Response Parameter
AT+ TXPOWER=<Param> OK+TxPower=<Param>
+SUCCESS
0:4db
1:0db
2:-6db
3:-23db
19、
Sets the minimum communication interval in milliseconds for the BLE chip
Command Response Parameter
AT+MINI_INTERVAL=<Param> OK+ Mini_Interval=<Param>
+SUCCESS
For PC and Android, it is
recommended to set it to 10iOS
device, and it is recommended to
set it to 20
20、
Sets the maximum communication interval in milliseconds for the BLE chip
Command Response Parameter
AT+MAX_INTERVAL=<Param> OK+Max_Interval=<Param>
+SUCCESS
For PC and Android, it is
recommended to set it to 10iOS
devices and 40
21、
Set the BLE receive gain
Command Response Parameter