background image

22

17

18

19

20

p.n. 4175169A

Italiano

English

Français

AVVIAMENTO

STARTING

MISE IN ROUTE

CARBURANTE

  ATTENZIONE: la benzina è un carburante estremamente 

infiammabile. Usare estrema cautela quando si 

manipola la benzina. Non fumare o portare fuoco o 

fiamme vicino al carburante o alla macchina (Fig.17).

 · Non fate il pieno con motore in marcia e nemmeno quando è 

ancora caldo.

 · Immagazzinare il carburante in contenitori specificamente 

destinati a questo uso (Fig. 18).

 · Effettuare il rifornimento esclusivamente all’aria aperta e non 

fumare durante lo stesso (Fig. 19).

 · Posizionare su di un terreno sgombro, fermare il motore e 

lasciare raffreddare prima di effettuare il rifornimento.

 · Allentare il tappo del carburante lentamente per rilasciare la 

pressione e per evitare la fuoriuscita di carburante.

 · Serrare saldamente il tappo carburante dopo il rifornimento. 

Le vibrazioni possono causare un allentamento del tappo e la 

fuoriuscita di carburante.

 · Asciugare il combustibile fuoriuscito dall'unità. Spostare la 

macchina a 3 metri di distanza dal sito di rifornimento prima 

di avviare il motore (Fig.20). 

 · Non tentare mai di bruciare combustibile fuoriuscito in 

qualsiasi circostanza. 

 · Non fumare durante la manipolazione del combustibile o 

durante il funzionamento della macchina.

 · Stoccare il carburante in un luogo fresco, asciutto e ben 

ventilato. 

 · Non stoccare il combustibile in luoghi con foglie secche, 

paglia, carta, ecc.

 · Conservare l'unità e il carburante in luoghi in cui i vapori di 

carburante non vengano a contatto con scintille o fiamme 

libere, bollitori di acqua per riscaldamento, motori elettrici o 

interruttori, forni, ecc.

 · Non rimuovere mai il tappo del serbatoio benzina quando il 

motore è in moto o è caldo.

 · Non utilizzare combustibile per operazioni di pulizia.

 · Fare attenzione a non spargere carburante sul proprio 

abbigliamento.

FUELING

  WARNING: Gasoline is an extremely flammable fuel. 

Use the utmost caution when handling petrol. Do not 

smoke or approach fuel or the machine with an open 

flame or source of ignition (Fig.17).

 · Do not refuel the engine while running or even while still hot.

 · Store fuel in containers specifically designed for the purpose 

(Fig. 18).

 · Always refuel outdoors and do not smoke while refuelling 

(Fig. 19).

 · Select bare ground, stop engine, and allow to cool before 

refueling.

 · Loosen fuel cap slowly to release pressure and to keep fuel 

from escaping around the cap.

 · Tighten fuel cap securely after refueling. Unit vibration can 

cause an improperly tightened fuel cap to loosen or come off 

and spill quantities of fuel.

 · Wipe spilled fuel from the unit. Move 3 metre away from 

refueling site before starting engine (Fig.20).

 · Never attempt to burn off spilled fuel under any 

circumstances.

 · Do not smoke while handling fuel or while operating the 

machine.

 · Store fuel in a cool, dry, well ventilated place.

 · Never place the mitblower in a combustible area such as dry 

leaves, straw, paper, etc.

 · Store the unit and fuel in an area where fuel vapors cannot 

reach sparks or open flames from water heaters, electric 

motors or switches, furnaces, etc.

 · Never remove the cap of the fuel tank while the engine is 

running or when the engine is hot.

 · Never use fuel for cleaning operations.

 · Take care not to get fuel on your clothing.

CARBURANT

  ATTENTION : l'essence est un carburant extrêmement 

inflammable. Prendre toutes les précautions 

nécessaires pour manipuler de l'essence. Ne pas fumer 

ni approcher de flammes à proximité du carburant ou 

de la machine (Fig. 17).

 · Ne pas faire le plein d'essence pendant que le moteur est 

chaud ou en marche

 · Emmagasiner le carburant dans des récipients prévus à cet 

effet (Fig. 18).

 · Effectuer le ravitaillement en plein air et ne pas fumer 

pendant cette opération (Fig. 19).

 · Placez au sol, coupez le moteur et laissez-le refroidir avant de 

procéder au ravitaillement.

 · Desserrez lentement le bouchon du carburant pour évacuer 

la pression et pour éviter que le carburant ne se déverse.

 · Serrez fermement  le bouchon après le ravitaillement. Sous 

l'effet des vibrations, le bouchon risque de se desserrer et le 

carburant de s'échapper.

 · Essuyez le carburant qui aurait pu s'échapper. Écartez l'outil à 

3 m du lieu de ravitaillement avant de démarrer le moteur 

(Fig.20). 

 · Ne tentez en aucun cas de brûler le carburant déversé. 

 · Ne fumez pas durant le ravitaillement ou lorsque la machine 

est en marche.

 · Stockez le carburant dans un endroit frais, sec et bien aéré. 

 · Ne stockez pas le carburant dans un endroit présentant des 

feuilles sèches, de la paille, du papier, etc.

 · Conservez l'outil et le carburant dans un endroit où les 

vapeurs de carburant n'entreront pas en contact avec des 

étincelles ou des flammes libres, des ballons d'eau pour le 

chauffage, des moteurs électriques ou des interrupteurs, des 

fours, etc.

 · Ne jamais retirer le bouchon du réservoir à carburant lorsque 

le moteur est en marche ou encore chaud.

 · N'utilisez pas de carburant pour les opérations de nettoyage.

 · Assurez-vous de ne pas déverser de carburant sur vos 

vêtements.

Summary of Contents for ALLROAD EXA4 SERIES





































Reviews: