D01-501106-01 Rev B
DSVGA Design Reference Board Manual
3
4. INTERFACE CONNECTIONS & SETUP
Setup Flow Chart
Figure 4-1 DRK Setup Flow Chart
Connect Display to the Design Reference Board
The microdisplay connects to the Design Reference Board via a 40-pin board-to-
board connector. The present version of the connector is
NOT
keyed so it is
important to correctly orient the display. Refer to the picture below for the proper
orientation. . The Display Carrier board is connected as shown in figure 4-2
below.
Note: The DSVGA OLED can be damaged if it is not connected properly.
