EMAC SoM-iMX6U, User Manual, Page: 5 / 22

SoM-iMX6U User Manual
Revision 1.00 © 2016 - 4 -
1 Introduction
This document describes EMAC’s SoM-iMX6U System-on-Module (SoM). TheSoM-iMX6U is designed to
be compatible with EMAC’s 144-pin SODIMM form factor. This module is built around the Freescale/NXP
i.MX 6UltraLite (MCIMX6G1) Cortex A7 528MHz processor, which provides several of its key features.
The SoM-iMX6U has onboard Ethernet PHY, 5 serial ports, 2 USB 2.0 ports, 1 I2S audio port, 1 SDIO SD
port, 1 I2C port, 2 CAN port, an internal real time clock (RTC), a programmable clock synthesizer,
onboard eMMC flash, a Serial NOR Flash and LPDDR2 RAM.
In addition to the standard SoM features, the SoM- iMX6U also features a fast 32-bit core, open source
software support, and a wide range of controller I/O pins.
1.1 Features

Small, 144 pin SODIMM form factor (2.66” x 1.5”)

NXP ARM Cortex-A7 MCIMX6G1CVM05AA 528MHz Processor

10/100 BaseT Ethernet with on-board PHY

16 bit External Bus Interface

4 Serial RS232 ports and 1 Serial RS232/422/485 port

2 USB 2.0 (High Speed) OTG ports

512/128 MB LPDDR2

4 GB of Resident eMMC Flash

16 MB of Serial Data Flash

Battery-backed Real-Time Clock

SD/MMC Flash Card Interface

1 SPI port

1 I2C port

1 I2S Audio port

2 CAN Bus Interface

Timer/Counters and Pulse Width Modulation (PWM) ports

4-Channel 12-bit Analog-to-Digital Converter

Typical power requirement: 3.3V @ 170 mA

JTAG for debug, including real-time trace

FREE QT Creator IDE with GCC and GDB development tools