ELECTRIC MOTION
32
9. Vehicle use
9.1 Control before use
It is important that the user of the ETrek motorcycle checks the
condition of the vehicle and the safety of operation before each
journey.
In use, the motorcycle must be in perfect technical condition.
The pre-trip verification work consists of:
-
Check the state of charge of the battery,
-
Check that the screws are tight,
-
Check the condition of all electrical equipment,
-
Check the brake system for proper condition (brake fluid,
brake pad wear and system operation),
-
Check the condition and pressure of the tires,
-
Check the condition of the transmission system (chain and
sprocket, lubrication),
-
Check the operation of the control devices.
If there are any abnormalities on the motorcycle during the
pre-trip inspection, do not take any risk. Contact
Electric Motion
customer service.
9.2 Starting of the bike
To start the motorcycle safely, follow these instructions:
-
Fold the stand,
-
Turn the key in the switch in the ON position,
-
The battery then turns ON
-
Wait a few moments for the initialization of the organs,
-
Set the general switch to the ON position.
